Select Page

Our standard 700 Series – the heart of Ever-Power quickness reducer products – has been serving industry reliably for over 10 years. Its proven modular design has set the market standard for performance and is the most imitated item in the current worm gear swiftness reducer marketplace. But why settle for a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes have earned a status to be a business benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-art technology, all while offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and engine interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low velocity gear ratio. Being basic and compact in style, these gears can achieve higher gear ratio compared to the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively larger) and its body is normally quite lengthy in the axial direction. The gears in these gearboxes could be right or left-handed dependant on the purpose.
Mounting choice include universal housing, part flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (single or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm can be shaped like a screw and the worm wheel is a kind of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that is fixed to ensure that it cannot rotate and therefore progresses in the axial path when the bolt is definitely turned.
The look of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. For this reason, in a 1 speed reduction gears, the wheel can be manufactured so that it’ll be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature makes it possible to layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw direction.
A multitude of shaft layouts The wide selection of shaft layouts is among the features of interlocking gears.For example, right shaft output, left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Number 2) and, if attachment orientations are included, you’ll be able to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic since the contact is definitely linear and the relative slide is great. In comparison with rolling power transmission, sound and vibration are extremely low. Because of this, this technology is utilized to drive medical devices, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in important areas such as for example selecting the strain index, calculating the overhang load and examining heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, heat produced during the initial period of make use of is high and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it’s important to improve the lubricating oil and also to change the lubricating oil from then on about 1 time per year according to the procedure manual supplied by the manufacturer.
Product Description
The Worm Decrease Gear Box is supplied by our company is of supreme quality. Our products are created through the use of premium quality materials and enhance technology at our vendors end. They are widely used in a variety of sectors. Our products are easily available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Attach.
High efficiency and secure operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute versatility is given by the wide selection of several mounting options, shaft configurations and electric motor interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, having a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) offers great versatility to suit a broad selection of applications and higher efficiency than the compact line XC, where the emphasis is on space performance.
Series H offers the same features as series X with an added plus: a spur equipment pre-stage at the input end provides higher overall performance and a broader selection of ratios than the X series.
Frame sizes 110 and 90 include a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy metal and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, result flange, single or dual extension result shaft, torque limiter with through cable, torque arm.