Select Page

Our worm equipment reducers offer a choice of a good or hollow output shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, however, can withstand shock loading much better than other decrease gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Sturdy or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s acceleration reducer product line – has been serving industry reliably for over 40 years. Its verified modular design has set the market standard for performance and may be the most imitated merchandise in today’s worm gear quickness reducer market. But why settle for a knock-off when you can have the original – from EP Gear.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for for a longer time operating life.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure confident, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with large input speeds, or when gearmotor efficiency is important. Contact our technical sales personnel for help determining which gearbox option is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and allow for a corner change with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our correct angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest procedure of our rate reducers. These gearboxes are created to deal with varying loads with small backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best result torque of all our acceleration reducers. These gearboxes are created to handle varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the top choice for constant duty applications. Their gear cluster design provides an effective technique for dissipating warmth. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options so they work very well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in substitute solution for most little parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, quickness reducers, worm equipment reducers and worm travel gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are metal or stainless steel.

While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A major benefit of worm gear reducers is definitely that they produce an output that is 90° from the input and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox has right hand threads; to change the direction of the result, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

Is this write-up not nearly enough? Learn even more concerning worm reduction gearbox at our site.