3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for any servo engine, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP's next generation cycloidal velocity reducer. It utilizes 52100 grade bearing steel on all of its speed reduction components. It really is offered with a full two year guarantee, not tied to hours of procedure, and can endure abuse that would break the teeth of ordinary swiftness reducers.
The EP 3000, easily available with inputs for both servo and induction motors, includes a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting choices, the EP 3000 includes a design hard enough for both servo and regular induction motor applications. The initial two piece pin casing design guarantees output shaft backlash ratings of less than 6 arc-min.
The EP offers a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to reach negligible backlash, maintain outstanding rigidity, and increase control stability so that the desired output motion can be easily achieved. The design is truly a distinctive concept, utilizing a full get in touch with screw-like tranny for high performance and elimination of use. The unit provides optimum compactness using orthogonal axes and includes a sizable hollow shaft for versatility.

Wide variety of servo gearboxes, made to fit almost all servo motors found on the market
Designed for the best torsional stiffness and the cheapest angular backlash, intended for the maximum torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The correct technical solution because of a comprehensive selection of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical products) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the growth of our range of Servo Reducers, now offering five levels of precision to meet any software requirements. The five degrees of precision available allows a machine designer to select the required reducer precision to meet their needs and their spending budget. They are available in both in-range and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.

The installation faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and mounting flanges are for sale to the complete reducer range to attach virtually any servo engine and the hollow bore output can be utilized to install output shafts, pinion shafts, or other drive components.
These reducers are usually selected based on the peak cycle forces, which usually happen during accelerations and decelerations. These cycle forces rely on the powered load, the swiftness vs. time profile for the routine, and any other exterior forces functioning on the axis. For more selection information, please follow this PDF hyperlink.

EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular style permits configurations with motor insight flange and output pinion for rack and pinion drives, along with solid result shafts, Hollow bore result, and input shafts for all the positioning applications. The modular design allows for universal installation of the gearbox in any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor kit. As the gears are normally angled, they lead to a short total length of the motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be constructed on the gear's output side.
Built with a simple and robust design, the series provides gearing ratios that range from 6:1 to 75:1. The user may also customize the materials through the order, in order to match the gear to its intended application.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right position shaft and right position output, as well as a full range of adapters for motor mounting, making them with the capacity of meeting the requirements of also the most varied applications. They are designed for make use of with integrated servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used with other EP motor types. This range of products is founded on years of experience and represents the outcome of a decade-long study aimed at improving performance.
Maximum precision and dynamics, coupled with exceptional torque density, will be the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for any app and any performance range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for innovation and the highest levels of precision.
Worm gear reducers provide market enhance solution with effectiveness and flexibility. Low quantity of basic models could be applied to an array of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are created for high-performance mechanical tools. When the motor speed must be reduced, the result torque boosts and send torque completely to the application. We believe that clients will appreciate our equipment reducer to accomplish their demand. Just visit EP, you can get more information about servo gearheads, servo gearboxes, and gear reducers. We always keep in the years ahead for your support.
Plug the Speed Reducer into the desired channel of your receiver, and connect the lead from your servo (or servo wye) into the male servo lead coming from the circuit board. The arranged screw on the blue trim pot, located near the top of the primary circuit board, is utilized to control the velocity of the servo. Turn the set screw fully clockwise (CW) for normal servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial velocity reduction. The crimson LED indicates three feasible conditions: Sluggish Blinking = No Transmission; Solid On = No Quickness Reduction; Fast Blinking = Reduced Swiftness Setting
Please note that if you make any alter to the speed setting while the receiver is on, you must cycle power to the receiver (turn if off and back on) for the new speed establishing to take effect. This circuit may also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to turn in opposite directions for appropriate function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This device will only work on a normal, proportional servo. You won't focus on a retract-type servo, because they do not acknowledge any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can't be slowed down, actually by a transmitter that includes this function, as their design and electronics do not allow it. Examine the FAQ page for more information.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a more scale-like movement of flaps or retracts. Adjustable, it can be set to reduce the acceleration of your servo from super-slow motion to no speed decrease at all, with an almost infinite amount of positions among. Maximum reduction period for a servo to travel 90 degrees is approximately 14 seconds, minimum period (no reduction) is simply the normal swiftness of the servo. Ideal for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control more than one servo by utilization of a normal servo Y.
This is the new regulated version that can be used on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/LiFE batteries. This unit won't reduce the voltage likely to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as packaging devices, gantries, injection molding devices, pick and place, and linear slides.Offered in concentric shaft, correct angle solid shaft, and right angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to easily mount to any manufacturer's servo engine. The EP Series helical gears have slanted teeth compared to spur gears with straight cut teeth, generating a smoother gear mesh, yielding considerably lower noise levels.
The low backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible flexibility and cost-efficiency because not every application requires high-performance parts.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 result, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 result, with keyway

If you have any type of concerns concerning servo gear reducer, maintain reading our specialists' articles.