Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when coming up with a worm gearbox selection.
First, what's the insight and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm gear reducer.
If the size of the gearbox is going to be an important consideration then check the reducer dimension specs, not all producers make compact units. In fact, working with the right supplier can help you not just find the right equipment reducer but also avoid some of the most common mistakes in reducer selection. We offer a free guide to assist you find the appropriate supplier to work with.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between both of these models. Both feature the hollow or solid result shaft. Both models are compact and provide users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is so versatile it can work just about anyplace.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high precision mini gearboxes that can't be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that are designed and created to meet your unique specifications.
Contact us for the mini gearbox the application requires, or request a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our little gear drives include details on the full selection of framework sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel package miniature equipment drives are program rated for the the best balance of performance and cost. Torque can be balanced to meet your RPM and operating life requirements. Lightweight with low backlash functionality (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They provide an output shaft at 90° from the input, and so are available in equipment ratios from 1:1 to 40:1. Light-weight but long lasting, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc minutes of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from reverse sides of the housing; output is certainly a keyed bore. Standard one- and double-end shafts can be found and supplied with keys and retainer bands. An array of gear ratios and input sizes are available to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They offer two insight shafts on reverse sides of the body, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high efficiency overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes produce an output at 90° from the insight. They deliver superior functionality in a wide variety applications and are constructed with little footprints, making them ideal for functions where space is limited. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power' micro inline spur gear drives can be found in two frame sizes, and are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your most demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver superior performance with high efficiency, and feature rugged structure for challenging power transfer procedures. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a custom miniature gearbox to meet your unique specs. We can produce customized micro gearboxes in virtually any configuration the application requires, with output torque amounts as high as 900Nm. We can work from your gearbox styles, reverse engineer an existing unit, or assist you to develop an all-new style that provides the performance you will need. Demand a quote on a custom made miniature gearbox or e mail us to discuss your unique requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We offer a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our program engineers to discuss your unique needs.
We offer a broad collection of misalignment shaft couplings in ” and metric bore sizes. Inch and metric precision floor shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive models deliver superior efficiency in a small footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or demand a quote on a customized model that's tailored to your needs.
Additional advantages of worm drive gearboxes include: