- Place of Origin:
- Brand Name:
- Model Number:
- Rated Power:
- Gearing Arrangement:
helical & worm
- Output Torque:
top to 6500NM
- Input Speed:
- Output Speed:
red, blue, gray,as resquest
- mounting type:
shaft or flange
- Quality Control System:
CCC,CQM,Supplier Assessment, MA
- Mounting Position:
Horizontal (foot mounted) or Vertical (flange mounted)
Steel or cast iron
- Gear material:
low carbon high alloy steel
- Gear accuracy:
less than 6
- Output Design:
solid shaft, hollow shaft, flange
- Supply Ability:
- 100 Set/Sets per Day Annual production: 500,000 sets
Packaging & Delivery
- Packaging Details
- Big size: fumigated wood carton or non-wood packing material carton”>Small size: standard export packing (carton and pallet)
Big size: fumigated wood carton or non-wood packing material carton
- main port of China
- about 30 workdays
For export GS feed drive saws gearbox:
You Benefit Main characties:
1. High modularization design: may equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2. Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3. High strength, compact structure: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
4. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
5. Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low.
6. May bear larger radial load.
7. It may bear the axial load that is not more than 15% of radial force.
Conveyor gearbox Introduction:
GS serial is one kind of helical reducer, output shafts of GS series are vertical to input shafts. Units of GS series consist of single stage helical gears and single stage worm gears.
1) Type GS: Foot mounted helical worm gear units with solid shaft.
2) Type GSF: B5 flange mounted helical worm gear units with solid shaft.
3) Type GSA: Helical worm gear units with hollow shaft.
4) Type GSAF: B5 flange mounted helical worm gear units with hollow shaft.
5) Type GSAZ: B14 flange mounted helical geared motor with extended bearing housing.
6) Type GSH:Helical-worm geared motor with hollow shaft and shrink disk.
7) Type GSHF: B5 flange-mounted helical-worm geared motor with hollow shaft and shrink disk.
8) Type GSHZ: B14 flange-mounted helical-worm geared motor with hollow shaft and shrink disk.
9) Type GSAT/GSHT: Torque-arm-mounted helical-worm gear units with hollow shaft.
10) Type GS..SZ..AD..: Shaft input helical-worm gar units.
11) Type GS..R: Combined types of series GS and series GR.
Main datas, pls kindly see below:
First Rate Equipment:
1>Guomao gear grinding workshop equipped with German Niles gear grinding machines.
2>Performance testing bench for large whole-set gear cases.
3>German P26 gear tester
4>Coordinate measuring machine
Packaged Goods Ready to Dispatch:
Standard exporting package. our packaging is we have a polythene liner bag enclosing the gearbox (which is moisture barrier, rust-proof). And also, we put polyurethane foam around the gearbox (for avoiding hit and shock). Then put it into a veneer case.