Product Description

UMC is the sector leader in gearbox technology. More than our forty yr heritage we have released many business altering gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and much more. We continue to determine and redefine business expectations for gearbox overall performance, quality, characteristics and technological innovation. Our gearboxes are purpose built to do the job. Never over-engineered.

UMC stands behind its goods and is fully commited to production the best products for a world-wide marketplace.

740-U 50:1 Ratio

Created for for a longer time spans, larger wheels, and heavier towers.
 

Functions and Rewards

  • 2.twenty five inch output shaft
  • fifty:1 equipment ratio
  • Cartridge input and output seals
  • Greater enter bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • Prime oil fill plug
  • Universal mounting sample
  • Total cycle enlargement chamber with stainless steel cover
  • Loaded with excessive stress worm equipment oil
  • Metal output shaft and enter shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Twin ended input shaft

740-UV fifty two:1 Ratio
Designed for for a longer time spans, bigger wheels and heavier towers where an extended output shaft is required.
 This gearbox has all the identical abilities, characteristics and benefits that the regular 740 has with a few tweaks. The output shaft is extended, the gear ratio is fifty two:1 and the enter shaft is made of ductile iron with a 25° pressure angle permitting this gearbox to be utilized on center pivot and lateral move/ linear techniques that arrive regular with these requirements.

Features and Positive aspects

  • 2.twenty five inch prolonged output shaft
  • fifty two:1 gear ratio with 25° strain angle
  • Cartridge enter and output seals
  • Bigger input bearings
  • Enter shaft guard
  • Exterior seal protectors for input and output seals
  • Top oil fill plug
  • Universal mounting pattern
  • Full cycle enlargement chamber with stainless steel go over
  • Loaded with excessive stress worm gear oil
  • Metal output shaft and ductile iron input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual ended input shaft

 

760-UV Gearbox

Created for corner techniques and lateral shift carts exactly where an extended output shaft is necessary

 

Growers usually use UMC's 760-UV gearbox for the most intense purposes exactly where an extended output shaft is essential. The gearbox is made for greater once-a-year hrs of procedure while handling the hefty loads skilled on corner methods and lateral shift carts as effectively as the most severe discipline situations exactly where wheel rutting is well known, soil is weighty, and tower weights are larger.

 

The UMC 760-UV ultimate push gearbox is our premier and most tough gearbox with an extended output shaft. It attributes a greater-diameter bull equipment than the standard 740 collection to take care of 20% increased torque. It also features a 2.5″ output shaft to accommodate more overhung load. It is developed for use on middle pivots, corners, lateral move/ linear irrigation programs and carts in which a 52:1 equipment ratio and prolonged output shaft are regular specs.

Characteristics and Benefits

  • 2.5″ output shaft
  • 52:1 gear ratio with a 25° stress angle
  • Exclusive twin enter and output seal style
  • twenty% far more torque capacity than the regular 740
  • Bronze equipment optional
  • Bigger input bearings
  • Input shaft guard
  • External seal protectors for input and output seals
  • 11-Bolt mounting sample
  • Complete cycle enlargement chamber with aluminum include
  • Stuffed with extreme force worm equipment oil
  • Steel output shaft and ductile iron enter shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Twin finished enter shaft

TNT-2 Gearbox

Created for apps where the irrigation technique may possibly require to be towed

 

This gearbox is the excellent remedy for a towable irrigation method. Growers typically choose this gearbox above a gearbox with a towable hub. Simply disengage the worm and tow your program to its operating spot, then re-engage the worm and you are ready to operate. The CX coupler is the perfect compliment for the TNT-2 gearbox owing to the ability to handle coupler disengagement at the gearbox.

 

The UMC patented TNT-2 final generate gearbox is made exclusively for purposes in which a center pivot or lateral shift/ linear irrigation program requirements to be towed. The gearbox supplies the potential to disengage the worm gear and enables consumers to go methods from 1 area to yet another without necessitating a Towable Hub add on.

Characteristics and Rewards

  • 2.25″ output shaft
  • 50:1 equipment ratio
  • Dual input seals with triple lip output seals
  • Bronze gear optional
  • Enter shaft guard
  • Exterior seal protectors for enter and output seals
  • Top oil fill plug
  • 11-Bolt mounting pattern
  • Total cycle growth chamber with stainless metal include
  • Filled with severe stress worm equipment oil
  • Metal output shaft and input shaft
  • Tapered roller bearings
  • Includes carriage bolts and nuts
  • Dual finished input shaft

 
 

760-UV Bronze Gearbox

Developed for the most intense problems where an prolonged output shaft is necessary.

 

Growers typically use The UMC 760-UV bronze gearbox for the most intense purposes in which an extended output shaft is required. The gearbox is made for greater yearly several hours of operation even though handling the heavy hundreds skilled on corner programs and lateral transfer carts as effectively as the most extreme subject problems exactly where wheel rutting is prominent, soil is large, and tower weights are increased.

 

The UMC 760-UV Bronze last push gearbox is our premier and most durable gearbox with an prolonged output shaft created for the most intense developing problems. It features a high strength aluminum bronze bull equipment and a heat handled steel worm equipment supplying it a much increased load capacity than the regular 760-UV. In addition, this gear combination drastically minimizes gear dress in, extending the useful life of the gearbox. It also functions a 2.5″ output shaft to accommodate more overhung load. It is developed for use on heart pivots, corners, lateral go/ linear irrigation methods and carts where a fifty two:1 gear ratio and extended output shaft are regular requirements.

Attributes and Advantages

  • two.5″ output shaft
  • 52:1 gear ratio with a 25° pressure angle
  • Exclusive dual input and output seal design and style
  • Bronze Gear
  • Heat Dealt with Steel Worm Equipment
  • Bigger input bearings
  • Input shaft guard
  • External seal protectors for enter and output seals
  • 11-Bolt mounting pattern
  • Entire cycle expansion chamber with aluminum go over
  • Filled with excessive strain worm gear oil
  • Steel output shaft
  • Tapered roller bearings
  • Consists of carriage bolts and nuts
  • Twin finished input shaft
  • Also Accessible Assembled in the United states of america

UMC is the industry chief in gearbox engineering. More than 37 calendar year background they have launched many market modifying gearboxes these kinds of as the patented TNT gearbox, the 740, the 760, the 775 and more. CZPT keep on to outline and redefine business requirements for gearbox functionality, top quality, characteristics and technological innovation. CZPT gearboxes are objective developed to do the task. Never more than-engineered.CZPT stands behind its items and is dedicated to manufacturing the best products for a worldwide industry.

 

US $220-440
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Agricultural Machinery, Agricultural
Function: Speed Reduction
Hardness: Hardened
Type: Worm and Wormwheel
Material: Cast Iron
Manipulate Way: Semi-Automatic Manipulation

###

Customization:
US $220-440
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Agricultural Machinery, Agricultural
Function: Speed Reduction
Hardness: Hardened
Type: Worm and Wormwheel
Material: Cast Iron
Manipulate Way: Semi-Automatic Manipulation

###

Customization:

Is a worm gear reducer gearbox right for your application?

If you're interested in gear reduction and wondering if a gearbox is right for your application, you've come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let's take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it's important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they're easy to maintain, which means they're an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Umc 725u Gearbox Umc 740u Gearbox on Lateral Move Irrigation     agnee worm gearboxChina Umc 725u Gearbox Umc 740u Gearbox on Lateral Move Irrigation     agnee worm gearbox
editor by czh 2023-01-30